AR Porn, my contribution..

DevilDoc · 03-21-2012, 08:36 AM

My AR's..

Top is my coyote/deer killer, "Gadsden" rifle.
-Stag 5H upper, 6.8spcII
-Spikes Tactical lower with DPMS LPK
-YHM full length, free float fore end
-YHM low-pro gas block
-Leupold VX1, 3-9x40
-Hogue grip

Lower is my zombie apocalypse/CQB/Tacticool/varmint rifle, "Molon Labe" rifle.
-CMMG mil-spec upper, 5.56
-DPMS lower, DPMS LPK
-MAGPUL CTR stock
-MAGPUL AFG2 front grip
-Hogue grip
-MI folding rear site
-GG&G folding front site/gas block
-YHM Phantom comp/flash hider
-VLTOR CASV-EL free float fore end
-Burris PEPR QD 30mm mount
-Burris Full-Field TAC30, illuminated halo reticle, with 5.56 BDC

Molon Labe! 5.56..

VLTOR CASV-EL. Expensive, but absolutely worth it! Lightweight, looks amazing, and free floated my barrel.

Burris PEPR with QD mount. A little on the heavy side, but well worth it when you compare the cost to systems like LaRue or DD.

Scope off, iron sights up. This is so light with the milspec handguard and front site off.

This is the 5.56 with my cheapie handloads. Generic 5.56 55gr FMJ, H335. Lots of holes in the paper, but the bottom right square is 2x2 at 100yds. I'm happy, considering the Burris scope has a 4moa center dot and was totally obscuring the square at that distance.

Don't tread on me! 6.8..

I wanted this gun to be lightweight, and minimalist. Shown with a 17rd Stoner mag.

This is the 6.8 during break in. The 2 to the left are before final adjustment, 3 in the bull are after I zeroed it. 100 yds with my handloaded 110gr Hornady HPBT's (with cannelure) and H335.

sunofnun · 03-21-2012, 02:08 PM

PRETTY!!!!!!!!!!!!!!

I like your thinking.. pretty similar to my two, except one of mine is a 20" and they're both 5.56. and it's not a free floater..

DevilDoc · 03-21-2012, 02:44 PM

Nice..! We should do a PNWGuns range day.

sunofnun · 03-21-2012, 03:34 PM

THey go to some property that miguel owns out in duval pretty regularly!!!!! I need to stop working so damn much. Lets set one up for this summer some time?

DevilDoc · 03-21-2012, 04:30 PM

Who's Miguel? Yeah, any time is good for me. Social calendar is wide open..

Guff · 03-21-2012, 06:12 PM

Quote:

Originally Posted by DevilDoc

Nice..! We should do a PNWGuns range day.

Keep me posted if one happens.

chameleon · 03-24-2012, 10:06 PM

Sorry about the crappy phone pics but here's my RRA after it was reworked by my Gunsmith.

chameleon · 03-24-2012, 10:07 PM

Also, She is fitted for a YHM suppressor. I'm about 3 months through the 6 month wait though and it's killing me lol.

DevilDoc · 03-25-2012, 07:39 AM

Very cool. YHM fore end? What scope is that?

chameleon · 03-25-2012, 07:42 AM

Just a POS NCStar. Once I have more money I plan on picking up an Aimpoint Pro with a 3x Magnifier.

chameleon · 03-25-2012, 07:43 AM

And yeah it's YHM. It was a fair amount lighter than the RRA Operator half quad that she came with.

WarriorDriver · 03-28-2012, 07:27 PM

16" barrel
.5moa shooter

DevilDoc · 03-29-2012, 07:53 AM

Quote:

Originally Posted by chameleon

Just a POS NCStar. Once I have more money I plan on picking up an Aimpoint Pro with a 3x Magnifier.

Quote:

Originally Posted by WarriorDriver

16" barrel
.5moa shooter

Nice! I really thought long and hard about 6.5 vs 6.8. Ended up choosing the 6.8 because I like the option of heavier bullets., and it seems like the grendel was more designed for 500yds + shooting, which I don't do. A big plus for the 6.5 was the availability of commercial ammo. I still haven't figured out why Wolf isn't making brass cased FMJ for the 6.8, but they do make it for the 6.5. As it stands now, I buy the cheap BVAC rounds at the gun show just for the brass.

We have got to do a range day..

WarriorDriver · 03-29-2012, 02:22 PM

How heavy of a bullet do you want to use? I think they make a 139gr for the Grendel.

I shoot 120gr reloads, I bought it for short distances, but its a 1000yd round, and its awesome from any distance. I went with it because the ballistics are so dang good on the 6.5mm bullets.

Smoked a coyote at 220yds, so far.

DevilDoc · 03-29-2012, 05:03 PM

Quote:

Originally Posted by chameleon

And yeah it's YHM. It was a fair amount lighter than the RRA Operator half quad that she came with.

Do you still have that RRA fore end?

Quote:

Originally Posted by WarriorDriver

How heavy of a bullet do you want to use? I think they make a 139gr for the Grendel.

I shoot 120gr reloads, I bought it for short distances, but its a 1000yd round, and its awesome from any distance. I went with it because the ballistics are so dang good on the 6.5mm bullets.

Smoked a coyote at 220yds, so far.

I didn't realize the 6.5 bullets were that heavy. Last time I Looked (a few years back), about the best you could find was 110-120, IIRC. I popped my deer this year with a 120gr. Pretty effective..

chameleon · 03-31-2012, 10:01 PM

Quote:

Originally Posted by DevilDoc

Do you still have that RRA fore end?

I don't. My G-smith took it with him to some other gun shows for me and managed to sell it.

DevilDoc · 04-01-2012, 10:06 AM

Quote:

Originally Posted by chameleon

I don't. My G-smith took it with him to some other gun shows for me and managed to sell it.

Ok, cool. I've got a buddy that was looking for that fore end specifically. Thanks..

chameleon · 04-03-2012, 06:08 PM

No problem DD. Good luck to your buddy!

WarriorDriver · 04-09-2012, 12:22 PM

Quote:

Originally Posted by DevilDoc

I didn't realize the 6.5 bullets were that heavy. Last time I Looked (a few years back), about the best you could find was 110-120, IIRC. I popped my deer this year with a 120gr. Pretty effective..

I think you can get a 139gr bullet now if you wanted. But 120-123gr is most popular

BLdtylry · 04-11-2012, 09:00 PM

Here's my Mega MA-TEN AR 308 Build. It's taken almost two years and I'm waiting for one last part; Accu-Shot BT12-QK Monopod.

I've been feeding her 168gr SMK but will switching to 178gr A-Max for long range targets. Still need to work up the load. Sorry about the dark photos, hopefully I can take better pictures tomorrow outside in natural light. Enjoy the AR Porn!

Mega MA-TEN Upper & Lower Receiver
Nightforce NXS F1 3.5-15x50 MLR2.0 with American Defense Mfg 20moa Recon Mount
Rainier Arms Select 18" Barrel 1:10 Twist
PRI Adjustable Low Profile Gas Block
PRI Carbon Fiber Rifle Length Forearm w/ SPR Top Rail
Young Manufacturing 308 Chrome Bolt Carrier & Gas Key
JP 308 Enhanced Bolt
SJC Titan Compensator
Phase 5 Tactical Ambi Bolt Release
Geisselle Super Dynamic Enhanced 2-Stage Trigger (SD-E)
KNS Gen2 Mod2 Non-Rotating Trigger/Hammer Pins
B.A.D. Ambi Safety Selector Levers
PRI Tactical Combat Latch
Spikes Tactical Mag Button
Enidine Hydraulic Buffer
PSA AR15 Carbine 6-Position Mil-Spec Buffer Tube
Tubbs CS Flatwire Buffer Spring
Magpul MIAD Pistol Grip
Magpul CTR Stock
Larue RISR
Larue POD
Noveske QD End Plate
PRI Front and Rear BUIS
Atlas BT10-LW17 Bipod

Total Build Price? Don't ask

sunofnun · 04-12-2012, 10:59 AM

OH DAMN!!!!!!!!!! AR10 drool!!!!!!!!

paintguy · 04-12-2012, 04:11 PM

Sporting AR Wood!!!!!

DevilDoc · 04-16-2012, 09:19 AM

Wow! We really need to have a range day. So many toys that I want to play with..

BLdtylry · 04-16-2012, 07:12 PM

I took my MA-Ten out to Plantation Rifle Range in Bellingham so I could zero at 100yds and shoot at 300yds. I was shooting 1 MOA at 300yds. This is the first time I've shot further than a 100yds since ETS'ing from the Army in 1992. Lots of fun and I definitely need more trigger time.

Bo

pnwvolks · 04-27-2012, 10:41 PM

Well here is my newest build. Finished this tonight and I couldn't be happier!

sunofnun · 04-28-2012, 06:08 AM

Quote:

Originally Posted by pnwvolks

Well here is my newest build. Finished this tonight and I couldn't be happier!

NO DETAILS??? 10 demerits.

I demand spec's and more pics! Congrats on the build, looks killer

pnwvolks · 04-28-2012, 06:16 PM

Quote:

Originally Posted by sunofnun

NO DETAILS??? 10 demerits.

I demand spec's and more pics! Congrats on the build, looks killer

HAHA yeah it was late when I posted and I was lazy...

I started off with a DPMS Panther Arms AR-15 carbine with flat top. I now have:
-Troy Industries Alpha Rail 13"
-Troy low pro gas block
-Rainier Arms Mini Compensator
-Magpul MOE grip
-Magpul vertical grip
-Magpul UBR stock
-Magpul front and rear gen2 flip up sights
-Magpul trigger gaurd
-Vortex Strikefire red/green dot 1x sight w/ 3x magnifier
-BMC Gunfighter charging handle
-Probably a couple things I'm forgetting..

I have lots of extra parts now haha.... I don't have my light on this nor do I have my ACOG attached anymore since I like the 1x sight a lot more and just don't need 4x. Oh and I forgot lots and lots of PMAGs haha.

here are some more pics!

And my other most recent build Warhammer!

cheers if you have any questions shoot.

Inglewood · 04-29-2012, 12:18 AM

Awesome job man

aaronk · 04-29-2012, 06:00 PM

And I thought my AR was cool... Great guns!

PiNk TCP · 04-29-2012, 07:01 PM

I think this is the first photo of all of my M&P15's together? No heavy mods, just a little tweaking for taste.

richardlpalmer · 04-29-2012, 10:11 PM

Awesome thread!

pnwvolks · 04-30-2012, 07:20 PM

I love that lil M&P15 pistol!! I bet that thing is a blast!!!!!!

PiNk TCP · 04-30-2012, 07:30 PM

Quote:

Originally Posted by pnwvolks

I love that lil M&P15 pistol!! I bet that thing is a blast!!!!!!

Yeah...it's allot of fun

For some reason Smith & Wesson quit making it?? ARCHIVE: M&P15-22P Pistol

"No longer in current production, content is subject to change and is provided here for reference purposes only."

pnwvolks · 04-30-2012, 07:45 PM

Quote:

Originally Posted by PiNk TCP

Yeah...it's allot of fun

For some reason Smith & Wesson quit making it?? ARCHIVE: M&P15-22P Pistol

"No longer in current production, content is subject to change and is provided here for reference purposes only."

That royally blows!

richardlpalmer · 05-03-2012, 09:30 AM

Quote:

Originally Posted by PiNk TCP

Yeah...it's allot of fun

For some reason Smith & Wesson quit making it?? ARCHIVE: M&P15-22P Pistol

"No longer in current production, content is subject to change and is provided here for reference purposes only."

That's too bad. I've been looking at getting one of the M&P15-22s but that pistol is way cool, too!

GixxerPete · 05-04-2012, 09:11 AM

I have an M&P1522 as well and love it. Thought about the pistol, but in the end went with the rifle and glad I did. It's just like it's big brother, my M&P15T and now even mo betta since it got a 'hand me down' Eotech from it's brother.

PiNk TCP · 05-04-2012, 01:38 PM

Quote:

Originally Posted by richardlpalmer

That's too bad. I've been looking at getting one of the M&P15-22s but that pistol is way cool, too!

The M&P Pistol shares the same magazines with the rifle, that is all the excuse I needed

richardlpalmer · 05-04-2012, 04:32 PM

Quote:

Originally Posted by GixxerPete

I have an M&P1522 as well and love it. Thought about the pistol, but in the end went with the rifle and glad I did. It's just like it's big brother, my M&P15T and now even mo betta since it got a 'hand me down' Eotech from it's brother.

That's a nice thing to have. :)

Quote:

Originally Posted by PiNk TCP

The M&P Pistol shares the same magazines with the rifle, that is all the excuse I needed

I'd hope so. Looks to be exactly the same (other than the stock & barrel...)

southpaw · 09-01-2012, 05:03 PM

My contribution
RRA lef-t

Ordered & paid for in early march, just picked it up 8-31-2012.
Still unfired.
I've never fired an ar platform rifle, just a bit excited & nervous.

qballrail · 09-01-2012, 05:20 PM

Quote:

Originally Posted by southpaw

My contribution
RRA lef-t

Ordered & paid for in early march, just picked it up 8-31-2012.
Still unfired.
I've never fired an ar platform rifle, just a bit excited & nervous.

Drooolll... hey it's my birthday and I choose THAT for my gift. Thanks, man! hehehe

Damn, that's one sweeeet piece. Yeah, I'd be a bit nervous too. Is it semi- or full?

03-21-2012, 08:36 AM	#1
DevilDoc Rifleman Joined: Nov 2009 From: Kirkland, Wa Posts: 176	AR Porn, my contribution.. My AR's.. Top is my coyote/deer killer, "Gadsden" rifle. -Stag 5H upper, 6.8spcII -Spikes Tactical lower with DPMS LPK -YHM full length, free float fore end -YHM low-pro gas block -Leupold VX1, 3-9x40 -Hogue grip Lower is my zombie apocalypse/CQB/Tacticool/varmint rifle, "Molon Labe" rifle. -CMMG mil-spec upper, 5.56 -DPMS lower, DPMS LPK -MAGPUL CTR stock -MAGPUL AFG2 front grip -Hogue grip -MI folding rear site -GG&G folding front site/gas block -YHM Phantom comp/flash hider -VLTOR CASV-EL free float fore end -Burris PEPR QD 30mm mount -Burris Full-Field TAC30, illuminated halo reticle, with 5.56 BDC Molon Labe! 5.56.. VLTOR CASV-EL. Expensive, but absolutely worth it! Lightweight, looks amazing, and free floated my barrel. Burris PEPR with QD mount. A little on the heavy side, but well worth it when you compare the cost to systems like LaRue or DD. Scope off, iron sights up. This is so light with the milspec handguard and front site off. This is the 5.56 with my cheapie handloads. Generic 5.56 55gr FMJ, H335. Lots of holes in the paper, but the bottom right square is 2x2 at 100yds. I'm happy, considering the Burris scope has a 4moa center dot and was totally obscuring the square at that distance. Don't tread on me! 6.8.. I wanted this gun to be lightweight, and minimalist. Shown with a 17rd Stoner mag. This is the 6.8 during break in. The 2 to the left are before final adjustment, 3 in the bull are after I zeroed it. 100 yds with my handloaded 110gr Hornady HPBT's (with cannelure) and H335.

04-11-2012, 09:00 PM	#20
BLdtylry Gunslinger Joined: Sep 2011 From: Snohomish, WA Posts: 36	Here's my Mega MA-TEN AR 308 Build. It's taken almost two years and I'm waiting for one last part; Accu-Shot BT12-QK Monopod. I've been feeding her 168gr SMK but will switching to 178gr A-Max for long range targets. Still need to work up the load. Sorry about the dark photos, hopefully I can take better pictures tomorrow outside in natural light. Enjoy the AR Porn! Mega MA-TEN Upper & Lower Receiver Nightforce NXS F1 3.5-15x50 MLR2.0 with American Defense Mfg 20moa Recon Mount Rainier Arms Select 18" Barrel 1:10 Twist PRI Adjustable Low Profile Gas Block PRI Carbon Fiber Rifle Length Forearm w/ SPR Top Rail Young Manufacturing 308 Chrome Bolt Carrier & Gas Key JP 308 Enhanced Bolt SJC Titan Compensator Phase 5 Tactical Ambi Bolt Release Geisselle Super Dynamic Enhanced 2-Stage Trigger (SD-E) KNS Gen2 Mod2 Non-Rotating Trigger/Hammer Pins B.A.D. Ambi Safety Selector Levers PRI Tactical Combat Latch Spikes Tactical Mag Button Enidine Hydraulic Buffer PSA AR15 Carbine 6-Position Mil-Spec Buffer Tube Tubbs CS Flatwire Buffer Spring Magpul MIAD Pistol Grip Magpul CTR Stock Larue RISR Larue POD Noveske QD End Plate PRI Front and Rear BUIS Atlas BT10-LW17 Bipod Total Build Price? Don't ask Last edited by BLdtylry; 04-11-2012 at 09:10 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-21-2012, 02:08 PM	#2
sunofnun Moderator Joined: Jan 2009 From: s. greenlake bitch Posts: 1,252	PRETTY!!!!!!!!!!!!!! I like your thinking.. pretty similar to my two, except one of mine is a 20" and they're both 5.56. and it's not a free floater..

03-21-2012, 02:44 PM	#3
DevilDoc Rifleman Joined: Nov 2009 From: Kirkland, Wa Posts: 176	Nice..! We should do a PNWGuns range day.

03-21-2012, 03:34 PM	#4
sunofnun Moderator Joined: Jan 2009 From: s. greenlake bitch Posts: 1,252	THey go to some property that miguel owns out in duval pretty regularly!!!!! I need to stop working so damn much. Lets set one up for this summer some time?

03-21-2012, 04:30 PM	#5
DevilDoc Rifleman Joined: Nov 2009 From: Kirkland, Wa Posts: 176	Who's Miguel? Yeah, any time is good for me. Social calendar is wide open..

03-24-2012, 10:06 PM	#7
chameleon Marksman Joined: Jan 2010 From: Bend, Or. Posts: 454	Sorry about the crappy phone pics but here's my RRA after it was reworked by my Gunsmith.

03-24-2012, 10:07 PM	#8
chameleon Marksman Joined: Jan 2010 From: Bend, Or. Posts: 454	Also, She is fitted for a YHM suppressor. I'm about 3 months through the 6 month wait though and it's killing me lol.

03-25-2012, 07:39 AM	#9
DevilDoc Rifleman Joined: Nov 2009 From: Kirkland, Wa Posts: 176	Very cool. YHM fore end? What scope is that?

03-25-2012, 07:42 AM	#10
chameleon Marksman Joined: Jan 2010 From: Bend, Or. Posts: 454	Just a POS NCStar. Once I have more money I plan on picking up an Aimpoint Pro with a 3x Magnifier.

03-25-2012, 07:43 AM	#11
chameleon Marksman Joined: Jan 2010 From: Bend, Or. Posts: 454	And yeah it's YHM. It was a fair amount lighter than the RRA Operator half quad that she came with.

03-28-2012, 07:27 PM	#12
WarriorDriver Marksman Joined: Jan 2009 From: Ltown, WA Posts: 253	16" barrel .5moa shooter

03-29-2012, 02:22 PM	#14
WarriorDriver Marksman Joined: Jan 2009 From: Ltown, WA Posts: 253	How heavy of a bullet do you want to use? I think they make a 139gr for the Grendel. I shoot 120gr reloads, I bought it for short distances, but its a 1000yd round, and its awesome from any distance. I went with it because the ballistics are so dang good on the 6.5mm bullets. Smoked a coyote at 220yds, so far.

04-03-2012, 06:08 PM	#18
chameleon Marksman Joined: Jan 2010 From: Bend, Or. Posts: 454	No problem DD. Good luck to your buddy!

04-12-2012, 10:59 AM	#21
sunofnun Moderator Joined: Jan 2009 From: s. greenlake bitch Posts: 1,252	OH DAMN!!!!!!!!!! AR10 drool!!!!!!!!

04-12-2012, 04:11 PM	#22
paintguy Gunslinger Joined: Jan 2011 From: Spokane, WA Posts: 29	Sporting AR Wood!!!!!

04-16-2012, 09:19 AM	#23
DevilDoc Rifleman Joined: Nov 2009 From: Kirkland, Wa Posts: 176	Wow! We really need to have a range day. So many toys that I want to play with..

04-16-2012, 07:12 PM	#24
BLdtylry Gunslinger Joined: Sep 2011 From: Snohomish, WA Posts: 36	I took my MA-Ten out to Plantation Rifle Range in Bellingham so I could zero at 100yds and shoot at 300yds. I was shooting 1 MOA at 300yds. This is the first time I've shot further than a 100yds since ETS'ing from the Army in 1992. Lots of fun and I definitely need more trigger time. Bo

04-27-2012, 10:41 PM	#25
pnwvolks Marksman Joined: Dec 2010 From: Fall City Posts: 280	Well here is my newest build. Finished this tonight and I couldn't be happier!

04-29-2012, 12:18 AM	#28
Inglewood Gunslinger Joined: Mar 2011 From: Renton, WA Posts: 66	Awesome job man

04-29-2012, 06:00 PM	#29
aaronk Gunslinger Joined: Oct 2009 From: Whatcom County, WA Posts: 19	And I thought my AR was cool... Great guns!

04-29-2012, 07:01 PM	#30
PiNk TCP Rifleman Joined: Feb 2011 From: Seattle, Wa Posts: 214	I think this is the first photo of all of my M&P15's together? No heavy mods, just a little tweaking for taste.

04-29-2012, 10:11 PM	#31
richardlpalmer Sniper Joined: Jan 2009 From: Kirkland, WA Posts: 1,103	Awesome thread!

04-30-2012, 07:20 PM	#32
pnwvolks Marksman Joined: Dec 2010 From: Fall City Posts: 280	I love that lil M&P15 pistol!! I bet that thing is a blast!!!!!!

05-04-2012, 09:11 AM	#36
GixxerPete Sharpshooter Joined: Jan 2009 From: Renton, WA Posts: 751	I have an M&P1522 as well and love it. Thought about the pistol, but in the end went with the rifle and glad I did. It's just like it's big brother, my M&P15T and now even mo betta since it got a 'hand me down' Eotech from it's brother.

09-01-2012, 05:03 PM	#39
southpaw Gunslinger Joined: Aug 2010 From: vancouver,wash. Posts: 11	My contribution RRA lef-t Ordered & paid for in early march, just picked it up 8-31-2012. Still unfired. I've never fired an ar platform rifle, just a bit excited & nervous.