PNW Guns Forum
Go Back   PNW Guns > Gun Forum > Auto Rifles

Reply
 
LinkBack Thread Tools Display Modes
Old 02-02-2017, 08:02 AM   #1
Newbie
 
Joined: Feb 2017
From: US
Posts: 1
Need Some AR help.

So I just moved up to Portland, OR from Comifornia, I am a gun nut. Huge gun activist as well. So in my move up here I am trying to get my CCW and arm myself. Now the issue is I moved up for work and need to keep my residency in California which means I can't even go into a FFL, let alone purchase a fire arm.

So this breaks this post into 2 parts essentially now...

The first part being is their anyway to make it so that I can Purchase firearms here in the state of Oregon without sacrificing my DL in Comifornia, seeing as to how I am here for work and school 6 months out of the year on average?

And the second part being, that I have already bought and had shipped a upper, barrel, BCG, keymod rail, gas system and with a trick we NEED to use in Comifornia a un-serialized 80% lower and lower parts kit, but I would need to mill it. So does anyone know where I can get my 80% lower milled out to spec? Or if that is even legal?

Last edited by omarsalah78; 02-02-2017 at 08:12 AM.
 
Join PNW Guns


Welcome to PNW Guns, a gun and firearm community for gun owners in the Pacific Northwest. We welcome everyone and the community is free to join so register today and become part of the PNW Guns family!


Old 02-21-2017, 04:20 PM   #2
Newbie
 
Joined: Feb 2017
From: Monroe, WA
Posts: 1
well if you've established residency in OR then apply for a DL there and cancel your CA one. that'll show your residency for purchases and shouldn't affect your CA residency. I could be mistaken.

Sent from my SM-G930V using Tapatalk
 
Old 02-24-2017, 08:12 PM   #3
Newbie
 
Joined: Feb 2017
From: Banks
Posts: 2
Just in case you did not find advice already... You will need to complete the lower yourself or with help from friend/family. Hopefully you have a jig and bits, if so, it will be a few hours with a drill press or router and you are building. It is going to be very hard to temporarily "transfer" the lower to a gunsmith as there is no serial number. I don't know of any places that would do work on one.

Unfortunately CA set the rules that prevent the fine folks in Oregon from selling to you, private sale or through a dealer, even a long gun.
 
Reply

  PNW Guns > Gun Forum > Auto Rifles



Thread Tools
Display Modes



Facebook @pnwguns PNW Guns RSS Feed

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0 ©2011, Crawlability, Inc.
Copyright 2009 - 2010 PNW Guns. All rights reserved.