Show off where you shoot

nwcid · 03-31-2010, 01:46 AM

I do a lot of steel shooting cause they are easy to deal with. I have steel targets at 25/50 yards, 100 yards and 300 yards that are up all the time. While I can not get actual group size this way I can get an idea from seeing the marks on the steel. Also my 100 yard target has 6", 4" and 2" swingers on it. On my 25/50 yard range it is easy to put a box with a target on it to test.

I have built a couple of paper target stands over the years but they get destroyed or are big/bulky to deal with. I saw another range last year where the guy was using press board for backing and a simple 2x4 stand. I forgot what it looked like so I though I would try my luck and just start building.

I had a couple of sheets of crappy leftover press board from a friend and cut them into 2' strips (2'x4'). Then I went to town on the base that would hold the board upright and be easy to change. While it is not pretty it worked out. I am sure there was a better way to do this (I am open for suggestions).

Then I did a scary thing and got online to look up plans for target stands. I didnt really care if they were portable or fixed somehow. Most of what I came up with was bases to hold the 1"x1" strips for hooking IDPA type targets too. While they work well it is not what I wanted.

Then there was one guy with an idea too simple to be true. It was one of those "that isnt right that it is that simple" things. He said use metal fence T posts and then use wire to hold the board to it

Well I do have more then a few T posts around here. The idea of the thread I read was to be portable and this easily fits the bill, they are easy to put in and take out. Simply drill holes in the board for the wire to pass though and pound the posts which takes less then 5 min for each target.

Here is from the 100 yard line. I now have paper stands at 25/50, 100, 200 and 300 yards from my back yard.

From the shooting line using the mound as a 25 yard,

migxdm · 03-31-2010, 01:01 PM

nice man! can you get me some steel?

nwcid · 03-31-2010, 01:42 PM

Quote:

Originally Posted by migxdm

nice man! can you get me some steel?

Very nice set up.

I picked up a bunch of plate at a scrap yard for fairly cheep. I have a neighbor that welds so he cut some squares and welded pipe to them for the hanger.

The plates dont hold up too well to CF rounds, but it was cheep. Next time I have him build some I am going to have it hung from a few chain links so there is more give in the target.

James · 03-31-2010, 03:07 PM

TRI-CITIES SHOOTING ASSOCIATION (TCSA)

AND

http://www.tcsa.info/

and the High power Range...
http://www.tcsa.info/HighPower.htm

Cowboy and Cowgirl range too!
http://www.tcsa.info/Cowboys/2009-SA...pplication.pdf

sunofnun · 06-08-2010, 06:37 AM

stickied lets see some more..

I just went to west coast armory's facilities in bellevue, pretty nice!

03-31-2010, 01:46 AM	#1
nwcid Gunslinger Join Date: Mar 2010 Location: Spokane/Yakima WA Posts: 59	Show off where you shoot I do a lot of steel shooting cause they are easy to deal with. I have steel targets at 25/50 yards, 100 yards and 300 yards that are up all the time. While I can not get actual group size this way I can get an idea from seeing the marks on the steel. Also my 100 yard target has 6", 4" and 2" swingers on it. On my 25/50 yard range it is easy to put a box with a target on it to test. I have built a couple of paper target stands over the years but they get destroyed or are big/bulky to deal with. I saw another range last year where the guy was using press board for backing and a simple 2x4 stand. I forgot what it looked like so I though I would try my luck and just start building. I had a couple of sheets of crappy leftover press board from a friend and cut them into 2' strips (2'x4'). Then I went to town on the base that would hold the board upright and be easy to change. While it is not pretty it worked out. I am sure there was a better way to do this (I am open for suggestions). Then I did a scary thing and got online to look up plans for target stands. I didnt really care if they were portable or fixed somehow. Most of what I came up with was bases to hold the 1"x1" strips for hooking IDPA type targets too. While they work well it is not what I wanted. Then there was one guy with an idea too simple to be true. It was one of those "that isnt right that it is that simple" things. He said use metal fence T posts and then use wire to hold the board to it Well I do have more then a few T posts around here. The idea of the thread I read was to be portable and this easily fits the bill, they are easy to put in and take out. Simply drill holes in the board for the wire to pass though and pound the posts which takes less then 5 min for each target. Here is from the 100 yard line. I now have paper stands at 25/50, 100, 200 and 300 yards from my back yard. From the shooting line using the mound as a 25 yard,

03-31-2010, 03:07 PM	#4
James Rifleman Join Date: Jan 2010 Location: Pacific NW Posts: 211	TriCities, WA TRI-CITIES SHOOTING ASSOCIATION (TCSA) AND http://www.tcsa.info/ and the High power Range... http://www.tcsa.info/HighPower.htm Cowboy and Cowgirl range too! http://www.tcsa.info/Cowboys/2009-SA...pplication.pdf __________________ Jim, the MC from Outdoor Channel's 'Shooting USA' will pay $10.00 of your NRA membership! Go to www.ShootingUSA.com and Join! Last edited by James; 03-31-2010 at 03:10 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-31-2010, 01:01 PM	#2
migxdm Rifleman Join Date: Feb 2009 Location: redmond,wa Posts: 185	nice man! can you get me some steel?

06-08-2010, 06:37 AM	#5
sunofnun Moderator Join Date: Jan 2009 Location: lynnhood Posts: 222	stickied lets see some more.. I just went to west coast armory's facilities in bellevue, pretty nice!